Dupli-Color Engine Enamel Ford Semi-Gloss Black 340g
Dupli-Color Engine Enamel Grabber Green Lime 340g
Dupli-Color Engine Enamel Clear 340g
Dupli-Color Engine Enamel Clearcoat is specifically designed to provide a durable, glossy, long-lasting finish over any Dupli-Color Engine Enamel Colour Coat.
Covers approximately 12-14 square feet per can.
Resists temperatures up to 500°F (260°C) intermittently.
Provides a superior glossy finish that will not blister, flake, crack, or peel.
*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.
Dupli-Color® Engine Enamel contains Ceramic Resins for maximum heat dissipation and gloss retention. The resins offer protection from exposure to excessive heat and automotive fluids. Excellent for under-the-hood applications, Dupli-Color Engine Enamel will perform to the most rigorous standards of racing, street rod, and vehicle restoration enthusiasts. This durable formula resists temperatures up to 500°F (260°C) intermittently and produces a superior finish that will not blister, flake, crack, or peel.
Directions:
PREP: Once Dupli-Color Engine Enamel colour coats are complete, apply Dupli-Color Engine Enamel Gloss Clearcoat within one hour. Mask-off surrounding areas to protect from overspray. Use at temperatures between 60 °F (16°C) and 95 °F (35°C) and when humidity is less than 60%. Do not apply paint in direct sun.
SHAKE: Shake can vigorously for one full minute after mixing ball moved freely. Shake can for 10 seconds after each minute of use.
APPLY: To spray, hold can parallel and 8-10 inches from surface to be painted and use in an even, sweeping motion. Apply 2 light coats, followed by one medium wet coat. Allow 10 minutes between coats. Apply all coats within 1 hour. Dries to the touch in 1 hour. Can be handled in 3 hours.
Additional Information:
Ideal for engine blocks, air cleaners, oil pans, valve covers, water pans, intake manifolds and other engine accessories.
Formulated as a glossy clearcoat to go over any Dupli-Color Engine Enamel colour coat.
Withstands temperatures up to 500°F (260°C).
The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
After each use, invert can and spray until clear gas comes out.
If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard empty can in trash pick-up.
Covers approximately 12-14 square feet per can.
*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.
Unfortunately we currently do not offer customer pick ups
How much does shipping cost?
Shipping is a flat fee of $9.95, there may occasionally be an extra freight charge if items purchased are heavy, bulky or being delivered to a regional or remote location, but we will notify you via email if this occurs
How long will Shipping Take?
Metro Areas
Usually between 1-7 business days since time of order
Rural Areas
Rural areas can take anywhere between 1-10 business days depending on where you are located