Dupli-Color Wheel Paint High Performance Bronze 312g

Dupli-Color Wheel Paint High Performance Bronze 312g

Dupli-Color Wheel Paint High Performance Gold 312g

Dupli-Color Wheel Paint High Performance Gold 312g

Dupli-Color Wheel Paint High Performance Matte Clearcoat 312g

Dupli-Color High Performance Wheel Paint Matte Clearcoat adds extra protection to any Dupli-Color High Performance Wheel Paint Colour Coating, providing a durable, long-lasting matte finish.

  • Covers approximately 12-14 square feet per can.
  • Withstands intermittent temperatures up to 250°F (121°C).
  • Ideal for: aluminium wheels, steel wheels, plastic hubcaps, and centre caps.

*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.

$26.99
24 Hour Dispatch
SKU
HWP106
or 4 interest-free payments of $6.75
Learn more

Dupli-Color® Wheel Coating is perfect for customizing or dressing up worn out wheels. This advanced, track-tested acrylic enamel formula restores original wheel appearance and protects against brake dust, chemicals, cleaning solvents, heat, and chipping. Dupli-Color Wheel Coating features a highly durable finish with superior adhesion to steel, aluminium, and plastic wheels, and wheel coverings.

 

Directions:

  1. PREP: Allow wheel paint colour 1 hour to dry before applying Matte Wheel Clearcoat. Prepare surface by removing loose paint, dirt, rust, grease, wax, etc. Use grease and wax remover or Dupli-Color Prep Spray PS100 to clean surface. Lightly sand surface with 600-grit sandpaper wet or dry. Wipe surface down again with Dupli-Color Prep Spray PS100. Use at temperatures between 60°F (16°C) and 95°F (35°C) and when humidity is less than 70%. Do not apply paint in the direct sun.
  2. SHAKE: Shake can vigorously for one full minute after mixing ball moves freely. Shake can for 10 seconds after each minute of use.
  3. APPLY: To spray, hold can parallel and 8-10 inches from the surface to be paints and use in an even, sweeping motion. Apply Matte Wheel Clearcoat in 2-3 light coats allowing 10 minutes between coats. Dried to the touch in 1 hour. Allow 4-5 hours of dry time before substrates are reinstalled or put to use.

 

Additional Information:

  • Adds extra protection to any Dupli-Color High Performance Wheel Paint Colour Coating, providing a durable, long-lasting matte finish.
  • Withstands intermittent temperatures up to 250°F (121°C).
  • Ideal for aluminium wheels, steel wheels, plastic hubcaps, and centre caps.
  • The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
  • After each use, invert can and spray until clear gas comes out.
  • If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard empty can in trash pick-up.
  • Covers approximately 12-14 square feet per can.

*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.

Pick Up

Unfortunately we currently do not offer customer pick ups

How much does shipping cost?

Shipping is a flat fee of $9.95, there may occasionally be an extra freight charge if items purchased are heavy, bulky or being delivered to a regional or remote location, but we will notify you via email if this occurs

How long will Shipping Take?

Metro Areas

Usually between 1-7 business days since time of order

Rural Areas

Rural areas can take anywhere between 1-10 business days depending on where you are located

Customer's Are Saying