{"product_id":"dupli-color-engine-enamel-ford-red-340g","title":"Dupli-Color Engine Enamel Ford Red 340g","description":"\u003cp\u003eDupli-Color Engine Enamel is specifically designed for high temperature and high-performance engine paint applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eResists temperatures up to 500°F (260°C).\u003c\/li\u003e\n\u003cli\u003eCovers approximately 12-14 square feet per can.\u003c\/li\u003e\n\u003cli\u003eIdeal for: Engine blocks, air cleaners, oil pans, valve covers, water pans, intake manifolds \u0026amp; other engine accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDupli-Color® Engine Enamel contains Ceramic Resins for maximum heat dissipation and gloss retention. The resins offer protection from exposure to excessive heat and automotive fluids. Excellent for under-the-hood applications, Dupli-Color Engine Enamel will perform to the most rigorous standards of racing, street rod, and vehicle restoration enthusiasts. This durable formula resists temperatures up to 500°F (260°C) intermittently and produces a superior finish that will not blister, flake, crack, or peel.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003ePREP\u003c\/em\u003e: Prepare surface by removing loose paint, dirt, rust, wax, and grease using a quality grease and wax remover. Scuff sand the surface with a scuff pad for maximum adhesion. Rinse well and dry with a clean dry cloth. Mask-off surrounding areas to protect from overspray. Use at temperatures between 60°F (15°C) to 95°F (35°C) and when humidity is less than 60%. Do not apply paint in direct sunlight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSHAKE\u003c\/em\u003e: Shake can vigorously for one full minute after mixing ball moves freely. Shake can for 10 seconds after each minute of use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eAPPLY\u003c\/em\u003e: To spray, hold can parallel at 8-10 inches from surface to be painted and use in an even, sweeping motion. Apply 2 light coats followed by 1 medium wet coat. Apply all coats within 1 hour, allowing 10 minutes between each coat. For additional coats after 1 hour, wait 7 days for paint to cure. Dries to the touch in 1 hour. Can be handled in 3 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Information:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFormulates with ceramic resins to provide a customised enhancement to your engine bay.\u003c\/li\u003e\n\u003cli\u003eWithstands heats up to 500°F (260°C).\u003c\/li\u003e\n\u003cli\u003eIdeal for engine blocks, air cleaners, oil pans, valve covers, water pans, intake manifolds and other engine accessories.\u003c\/li\u003e\n\u003cli\u003eFor additional protection once Engine Enamel colour coats are complete, apply Dupli-Color Engine Enamel Clearcoat within one hour. Apply Engine Enamel Clearcoat according to application instruction on the can.\u003c\/li\u003e\n\u003cli\u003eThe EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.\u003c\/li\u003e\n\u003cli\u003eAfter each use, invert can and spray until clear gas comes out.\u003c\/li\u003e\n\u003cli\u003eIf spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into can opening. Discard empty can in trash pick-up.\u003c\/li\u003e\n\u003cli\u003eCovers approximately 12-14 square feet per can.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*This item is considered DG \u0026amp; may incur additional freight charge “ Please see our Shipping \u0026amp; Delivery tab for further information.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Dupli-Color","offers":[{"title":"Default Title","offer_id":46291836666096,"sku":"DE1605","price":29.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0694\/5918\/1808\/files\/s-l1600_c64a056e-e67a-4c7d-9de8-610eb2b10aa0.webp?v=1790748502","url":"https:\/\/www.automegastore.com.au\/products\/dupli-color-engine-enamel-ford-red-340g","provider":"AutoMegaStore","version":"1.0","type":"link"}