1kg Dry Chemical ABE Fire Extinguisher with Plastic Bracket

Dry chemical fire extinguishers can be used on a variety of common fire causing materials:

A - Paper, wood, textile objects

B - Flammable liquids: paint, oil, petroleum, grease, ect.

E – Electrical Equipment: Appliances, switchboards, motors, and machinery.

Total weight mass: 1.7KG including bracket, gauge comes in operational range.  

Is it made of steel or aluminium?

ABE Extinguishers cylinders are almost never made from aluminium, as ABE powder reacts with and will corrode aluminium over time. Typically only CO2 extinguishers will use aluminium in their construction.

Can the brass mechanism trigger be screwed off?

Yes the valve may be screwed off and disassembled if required.

However, some safety notes:

The valve MUST NOT be removed if the extinguisher is pressurised. All extinguishers contain compressed gas stored at high pressure. Any tampering with an extinguisher valve while pressurised may lead to injury.

Completely discharging an extinguisher is not an indicator that the compressed gas is at a safe pressure. The valve should be left open while unscrewing from the cylinder to ensure there is no pressure build-up.

If the purpose of removing the valve is to recharge the extinguisher, this should only be done by trained service technicians and genuine parts may only be used when recharging.

Use of non-genuine parts and untrained individuals when recharging will void warranty and breach the requirements of Australian Standards, as we are no longer able to guarantee the performance of the product.

Measurements/Dimensions:

Height (bracket applied / from the bottom to top of the trigger): 30cm
Width (bracket applied): approx 9.5cm-10cm

Bracket Height (not applied to extinguisher): 20cm
Bracket Width (not applied to extinguisher): approx 9.5cm-10cm

Nozzle Outlet Dimension: approx 1.5cm

Trigger Handle Width: 2cm
Trigger Handle Length: approx 7cm