Dupli-Color® Engine Enamel contains Ceramic Resins for maximum heat dissipation and gloss retention. The resins offer protection from exposure to excessive heat and automotive fluids. Excellent for under-the-hood applications, Dupli-Color Engine Enamel will perform to the most rigorous standards of racing, street rod, and vehicle restoration enthusiasts. This durable formula resists temperatures up to 500°F (260°C) intermittently and produces a superior finish that will not blister, flake, crack, or peel.
Directions:
PREP: Prepare surface by removing loose paint, dirt, rust, wax, and grease using a quality grease and wax remover. Scuff sand the surface with a scuff pad for maximum adhesion. Rinse well and dry with a clean dry cloth. Mask-off surrounding areas to protect from overspray. Use at temperatures between 60°F (15°C) to 95°F (35°C) and when humidity is less than 60%. Do not apply paint in direct sunlight.
SHAKE: Shake can vigorously for one full minute after mixing ball moves freely. Shake can for 10 seconds after each minute of use.
APPLY: To spray, hold can parallel at 8-10 inches from surface to be painted and use in an even, sweeping motion. Apply 2 light coats followed by 1 medium wet coat. Apply all coats within 1 hour, allowing 10 minutes between each coat. For additional coats after 1 hour, wait 7 days for paint to cure. Dries to the touch in 1 hour. Can be handled in 3 hours.
Additional Information:
Formulates with ceramic resins to provide a customised enhancement to your engine bay.
Withstands heats up to 500°F (260°C).
Ideal for engine blocks, air cleaners, oil pans, valve covers, water pans, intake manifolds and other engine accessories.
For additional protection once Engine Enamel colour coats are complete, apply Dupli-Color Engine Enamel Clearcoat within one hour. Apply Engine Enamel Clearcoat according to application instruction on the can.
The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
After each use, invert can and spray until clear gas comes out.
If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into can opening. Discard empty can in trash pick-up.
Covers approximately 12-14 square feet per can.
*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.
Unfortunately we currently do not offer customer pick ups
How much does shipping cost?
Shipping is a flat fee of $9.95, there may occasionally be an extra freight charge if items purchased are heavy, bulky or being delivered to a regional or remote location, but we will notify you via email if this occurs
How long will Shipping Take?
Metro Areas
Usually between 1-7 business days since time of order
Rural Areas
Rural areas can take anywhere between 1-10 business days depending on where you are located