Dupli-Color Trim Paint Black 312g

Dupli-Color Trim Paint restores OEM Flat Black finishes. Ideal for using on metal trim, rear view mirrors and other vehicle areas.

Directions:

1. PREP: Prepare surface by removing loose paint, dirt, rust, grease, wax, etc. For best results, use a Dupli-Color Prep Wipe PW100 or Grease& Wax remover to clean surface. Scuff/sand with a red Scotch Brite Pad or equivalent. Mask-off surrounding areas to protect form overspray. Apply Dupli-Color Sandable Primer DAP1692 to bare metal surfaces. Use at temperatures between 60°F (15°C) and 92°F (35°C) and when humidity is less than 60%.
2. SHAKE: Shake can vigorously for one full minute after mixing ball moves freely. Shake can for 10 seconds after each minute of use.
3. APPLY: To spray, hold can parallel, 8-10 inches from surface to be painted and use in an even, sweeping motion. To avoid runs and sags, apply 2-3 light coats, allowing surface to dry 10 minutes between coats. Dries to the touch in 30 minutes. Can be handled in 1 hour.

Additional Information:

• Restores OEM Flat Black finishes on metal trim, rear view mirrors and other vehicle areas.
• Quick drying and durable with excellent adhesion qualities.
• The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
• After each use, invert can and spray until clear gas comes out.
• If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard empty can in trash pick-up.
• Covers approximately 12-14 square feet per can.

*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.