Flamingo Rubberized Undercoat 500mL

This product has particular rust prevention and anticorrosion functions. It fast and effectively forms a special protective film to absolutely protect rubber and metal at the bottom of vehicles from rust and stones. It also greatly reduces noise. It is especially suitable for the bottom of vehicles, luggage boots, sand boards and the pot hole of wheel, etc. Product quality meets the professional requirements of all vehicle-making factories.

DIRECTIONS:

1. Clean and dry the surface to be sprayed. Ensure that the surface to be sprayed is clean and dry, no dust or oil. The part not to be sprayed must be covered.

2. The product should be shaken evenly before and during use.

3. This product must be sprayed on an unexposed part for a test.

4. This product should be sprayed evenly up and down 20-40cm from the surface. The part sprayed incorrectly can be cleaned immediately with cloth with kerosene or similar product.

5. When most of this product is used up and the rest can’t be sprayed, try to press the jet nozzle and rotate the can until the material in it can be sprayed.

6. After use, clean the jet nozzle. Reduce the can until clean gas can be sprayed.

7. This product can be dried 4-6 hours after sprayed depending on temperature.