Provides one-step treatment that destroys old rust and prevents new rust.
Can be used when temperature is between 50°F and 90°F (10°C and 32°C) and on surfaces which do not exceed 200°F (93°C)
Directions for use:
Use gloves to prevent staining of hands.
Scrape or wipe off dirt & oil. Sand with coarse sandpaper or wire brush.
Should be used when temperature is between 50° and 90°F (10°and 32°C). Can be applied to surfaces which do not exceed 200°F (93°C).
Shake well before using. Spray a thin coat onto rusted surface 8-10 inches away until surface is lightly and evenly coated.
Apply 2-3 thin coats, allowing no more than two minutes drying time between coats. Final application should dry to a black finish.
Allow 24 hours drying time before top coating. Water based finish topcoat paints will require an additional non-water-based primer prior to application of topcoat. Protect from moisture and humidity. For a smooth finish, sand with 320 grit sandpaper before top coating.
Unfortunately we currently do not offer customer pick ups
How much does shipping cost?
Shipping is a flat fee of $9.95, there may occasionally be an extra freight charge if items purchased are heavy, bulky or being delivered to a regional or remote location, but we will notify you via email if this occurs
How long will Shipping Take?
Metro Areas
Usually between 1-7 business days since time of order
Rural Areas
Rural areas can take anywhere between 1-10 business days depending on where you are located