ProTyre Digital Tyre Pressure Gauge

ProTyre Digital Tyre Pressure Gauge

4 Units Change: 2-100PSI, 4-700KPA, 0.2-7BAR, 0.2-7KG/CM2

Features backlit LCD, Digital tyre gauge, and Built-in LED.

Battery Rechargeable - Uses 5x AG13 Lithium batteries.

Instructions:

1. Press 'on' button.

2. The enxt step will show the message "0.0PSI" on the display. In case you want to measure the tire pressure with a different scale (KPA,BAR,KG/CM2), press the 'on' button until the display blinks then press it again to swtich to KPA. BAR, KG/CM2.

3. Place the nozzle of the manometer on the wheels valve. Make sure that they are close toghether pressing the manometer stedily. Prevent any whistling as this would indicate the air is escaping from the tyre. Remove the manometer and check the exact tire pressure. In case you need to repeat the operation, follow this instruction again.

Renewing Battery:

1. Low battery will be shown on the LCD.

2. Unscrew the rear of the case and seperate from the body.

3. Replace the dead battery with new AG13 betteries, chekcing that the (+) and (-) polarities are correct.

Warning:

• Always follow manufacturers tire pressure recommendations.
• Do not allow gauge to become wet.