Ratchet Tie Down Blue 25mm x 6m

Ratchet Tie Down Blue 25mm x 6m

Quick-release ratchet mechanism with soft tie loop for added protection to Motorcycle bars and frames.

Soft grip handle and coating S Hooks.

Suitable for medium-duty applications - do not exceed lashing capacity.

High UV resistant ratchet tie down.

Specifications:

Pack of 1

FREE storage bag included - see back of product.

Lashing Capacity: 450Kg

Breaking Strength: 900kg

Size: 25mm x 6m

Operating Instructions: Figure images provided on back of product.

1. Place webbing over the load and attached hooks to solid anchor points.

2. Insert free end of the webbing through slot in ratchet wheel and pull webbing thorugh a few centimetres. Then hold webbing and pull until all slack is removed (See Figure A).

3. Pump ratchet handle and wind 2 to 4 layers of webbing around reel to secure and set to desired tension. Be aware too many layers of webbing may jam ratchet. If too many layers of webbing on wheel, start procedure over by first removing all slack from webbing load (See Figure B).

4. Always lock the ratchet by leaving the handle in the closed position (See Figure C).

5. To release, pull back the release bar and open the handle all the way to 180 degrees (See Figure D).

6. When not in use, store in storager bag provided in this pack and keep in dry area.