Seafoam High Mileage / Older Engine Package

Seafoam High Mileage 473ml:

• Add to fuel to clean injectors and carburettor jets
• Add to crankcase oil
• Lubricates upper engine
• Reduce engine wear
• Use regularly to prevent rough running
• Safe for all petrol engines and oil types

Use regularly in fuel and oil systems to keep high mileage cars and trucks running longer.

• Pour High Mileage in your fuel tank to clean & lubricate your entire fuel system.
• Add High Mileage to your crankcase oil to remove harmful oil residues & deposits that can restrict oil flow & engine lubrication.
• Safe and effective in all types of gasoline fuel and all types of motor oil.

High Mileage is specially formulated for gasoline cars and trucks over 120,000Kms

• Excellent for cleaning dirty fuel injectors and carb jets, intake valves, and chamber areas after years of harmful build-up.
• Liquefies and cleans stubborn oil residues. Works to prevent sludge accumulation in oil crankcases.
• Use regularly in your fuel tank and oil crankcase to prevent rough engine performance.

Seafoam Top Engine Cleaner and Lube Spray 340g:

Lubricates critical upper engine areas and removes harmful carbon deposits where other additives cannot.

• Safe in all types of 2 & 4 stroke gasoline engines
• Apply through gas fuel-injection throttle body or carburettor throat
• Lubricates throttle plates, bushings & upper cylinders
• Important for modern Gasoline Direct Injection (GDI) engines
• Use to fog & protect intake & cylinder areas during storage

Petrol Injection Guide

1. Run engine to warm intake, then turn off accessories and shut off engine.
2. Loosen and remove intake boot from throttle body.
3. With Hook Guide and Cleaning Tube placed in the throttle body, direct tube nozzle end ¼” in front of throttle plate location where the throttle plate opens away from nozzle (see diagram).
4. Re-fit the intake boot over the Hook Guide and throttle body.
5. With vehicle in park and parking brake applied, start engine and hold RPM steady at 2,000 for the duration of the application.
6. Spray continuously until contents are empty (approx. 7 minutes), then shut off the engine and remove intake boot to recover Hook Guide and Tube.
7. With engine turned off, re-secure the intake boot onto the throttle body and allow engine to hot soak for 10 minutes.
8. After hot soak, start and drive the vehicle under engine load for 10 minutes or longer. Apply spirited acceleration when safe to burn off hydrocarbon residues.
9. DO NOT spray into the mass air flow sensor.
10. DO NOT use a scan tool to increase RPM via the air bypass valve.
11. Not for use with diesel air intake systems.

For Carburettor Engines

1. Run engine to warm intake, then shut off.
2. Remove air filter to access carburettor throat.
3. With air filter removed, start engine and place tube nozzle into carburettor throat.
4. Depending on engine size, use 2 to 4 ounces sprayed in bursts to avoid engine stalling.
5. Spray a long burst, shut off engine and allow to hot soak for 10 minutes.
6. After hot soak, start and operate engine for 10 minutes or longer.

For Engine Fogging

1. With the engine running, insert Sea Foam Spray tube (cut to shorten if needed) into intake throat (if carburettor) or directly before throttle plate opening (if fuel injection).
2. Spray a series of 3 to 5 bursts, then a final direct stream while shutting off engine. For larger engines such as autos with a carburettor intake, use 6 bursts.
3. After fogging the intake, allow engine to cool & remove spark plugs.
4. Insert Sea Foam Spray tube to spray each cylinder cavity.
5. Before re-inserting spark plugs, crank engine to rotate pistons (key turn, or rope pull for small engines). Note: Deep Creep & Sea Foam Spray are interchangeable for chamber lubrication.

Sea Foam Spray is a blend of cleaning and lubricating petroleum ingredients that can be used SAFELY in all types of 2 and 4 stroke gasoline engines. Especially important for modern GDI engines, it cleans critical upper engine areas where fuel cleaners can’t reach.

Apply Sea Foam Spray through fuel injection throttle bodies to clean harmful engine deposits from intake valves and combustion chamber areas. Use Sea Foam Spray to fog engines and coat spark plug cavities to protect your engine during storage.

Sea Foam Spray does NOT contain harsh detergent or abrasive chemicals that can harm your engine or fuel system components. Help your engine run cleaner and last longer!

Seafoam Injector Cleaner / Upper Cylinder Lube 155ml:

Small Package – Big Punch. Recover lost kilometres and reduce exhaust emissions. NOT for use in diesel.

• Clean injectors and restore injector spray pattern
• Adds lubricity to upper cylinders
• Concentrated formula treats 95L
• Easy to pour bottle
• Safe for all petrol fuel injection engine

Simply pour a full bottle of IC5 Fuel Injector Cleaner in your fuel tank to help clean fuel injectors and restore injector spray patterns.

Cleaner fuel injectors lead to better fuel efficiency and performance.

• Use regularly to help overcome or prevent hard starts, rough idling and hesitations.
• Use to recover lost fuel economy or lost power caused by dirty injector fouling.

Cleaning fuel injectors has never been this easy!

• Specially formulated to help clean fuel injectors.
• Helps restore injector spray patterns for better engine performance.