Cambuckle Tie Down 38mm x 4m Heavy-Duty

Cambuckle Tie Down 38mm x 4m Heavy-Duty

Conforms to AS/NZ 4380 Australian Standard

Quick-Release Cambuckle Heavy Duty Tie Down with extra strong polyester webbing & high UV resistance.

Suitable for heavy-duty applications - do not exceed lashing capacity.

Operating Instructions: *Figures provided on backside of product*

1. Place the strap around the load.

2. Press release lever (see Figure A).

3. Insert webbing up from the bottom and under the cambuckle teeth (see Figure B).

4. Pull webbing tigh until all slack is removed and to set desired tension (see Figure C).

5. To release, press lever button and pull webbing out of the cambuckle (see Figure D).

Specifications:

Lashing Capacity: 450kg

Breaking Strength: 900kg

Width: 38mm

Length: 4 metre

Pack of 1x.

Warning:

Do not use this product for lifting or other situations where personal safety or valuable property could be endangered. Do not use if webbing is visibly worn or distorted.

Failure to comply with warnings may result in personal injury and load damage. 

1} User to evaluate Lashing Capacity requirements. 2} Area of attachment on vehicle or trailer must be sufficient strength to hold load. 3} Load can shift and settle whilst traveling; check tie down regularly. 4} Do not use if fittings are damaged or webbing is cut, frayed, burned, melted or abraded. 5} Use only as a Tie Down, never for lifting, towing or personal restraint. 6} Never stand directly in the path of a load under tension. 7} Check regularly for visible signs of wear and tear. If in doubt of serviceability, please withdraw from use.