Dupli-Color Adhesion Promoter Clear Primer 312g

Dupli-Color® Adhesion Promoter improves adhesion of enamel and lacquer topcoats to all surfaces, including plastic and chrome. Adhesion Promoter is an all-purpose clear primer ideal for both interior and exterior applications.

Directions:

1. PREP: Prepare surface by removing loose paint, dirt, rust, grease, wax, etc. For best results use a grease and wax remover to clean the surface. Mask-off surrounding areas to protect from overspray. Use at temperatures between 60°F (16°C) and 95°F (35°C) and when humidity is less than 60-70%.
2. SHAKE: Shake can vigorously for one full minute after mixing ball moves freely. Shake can for 10 seconds after each minute of use.
3. APPLY: To spray, hold can parallel and 8-10 inches from the surface and use in an even, sweeping motion. To avoid runs and sags, apply in 2-3 light coats, allowing 3 minutes between each coat. Apply topcoat within 10 minutes of last adhesion promoter coat.

Additional Information:

• Improves adhesion of enamel and lacquer topcoats, whilst maximising topcoat performance.
• Suitable for plastic and vinyl surfaces, including interior & exterior purposes.
• The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
• After each use, invert can and spray until clear gas comes out.
• If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard empty can in trash pick-up.
• Covers approximately 12-14 square feet per can.

*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.