Dupli-Color Night Shades Lens Paint Red 283g

Dupli-Color Night Shades Lens Paint Red 283g

VHT Nite-Shades Lens Paint Red 283g

VHT Nite-Shades Lens Paint Red 283g

Dupli-Color Night Shades Lens Paint Black 283g

Dupli-Color Night Shades Paint is specifically designed to provide a transparent tint to your lights.

  • Covers approximately 12-14 square feet per can.
  • Provides a transparent tint to light covers & clear plastics.
  • Not suitable for road use – offroad purpose only.

*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.

$27.99
24 Hour Dispatch
SKU
NS999
or 4 interest-free payments of $7.00
Learn more

Dupli-Color Night Shades is a transparent black taillight lens coating that is designed to give you vehicle that custom appearance. When applied, Dupli-Color Night Shades give your lights a “Black Out” appearance until they are lit, then the natural colour shows through. Ideal for taillights, fog lights, side markers or turn indicators. Recommended for off-road use.

 

Directions:

  1. PREP: Removing the substrate from the vehicle is recommended for ease of application. Prepare the surface by removing any oil, grease, wax, or road tar. For best results wipe down with a grease and wax remover and a clean cloth to clean the surface. Mask-off surrounding areas to protect from overspray. Use at temperatures between 60°F (16°C) and 95°F (35°C) and when humidity is less than 60%.
  2. SHAKE: Shake can vigorously for one full minute after mixing ball moves freely. Shake can for 10 seconds after each minute of use.
  3. APPLY: To spray, hold can parallel and 8-10 inches from surface to be painted and use in an even, sweeping motion. Apply one light coat or just enough to change lens colour. DO NOT exceed more than 3 coats or light may not show through. Dried to the touch in 1 hour. Can be handled in 3 hours. Cures completely in 24 hours.

 

Additional Information:

  • Optional: Apply a clear lacquer for added gloss and protection.
  • Removing substrate from the vehicle is recommended for ease of application.
  • Provides a customised transparent-tint enhancement to taillights, fog lights side markers and turn indicators.
  • For off-road use only.
  • Once applied to plastic, the paint cannot be satisfactorily removed.
  • Too many coats can result in light not showing through – please refer to directions.
  • The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
  • After each use, invert can and spray until clear gas comes out.
  • If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard empty can in trash pick-up.
  • Covers approximately 12-14 square feet per can.

*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.

Pick Up

Unfortunately we currently do not offer customer pick ups

How much does shipping cost?

Shipping is a flat fee of $9.95, there may occasionally be an extra freight charge if items purchased are heavy, bulky or being delivered to a regional or remote location, but we will notify you via email if this occurs

How long will Shipping Take?

Metro Areas

Usually between 1-7 business days since time of order

Rural Areas

Rural areas can take anywhere between 1-10 business days depending on where you are located

Customer's Are Saying