Dupli-Color Trim & Bumper Paint Dark Charcoal 312g

Dupli-Color® Trim & Bumper Paint features Fade-X™ Technology to ensure a long-lasting finish for exterior and interior applications. This specialty formulation restores trim and bumper surfaces back to their factory-look.

Directions:

1. PREP: Prepare surface by removing dirt, wax and grease using a wax and grease remover, such as Dupli-Color Prep Spray PS100, then let dry and ensure surface is completely dry prior to paint application. Mak-off surrounding areas to protect from overspray. Use at temperatures between 60°F (16°C) and 95°F (35°C) and when humidity is less than 60%.
2. SHAKE: Shake can vigorously for one full minute and after each minute of use.
3. APPLY: To spray, hold can parallel at 8-10 inches from surface to be painted and use in an even, sweeping motion. To avoid runs or sags, apply 2-3 light coats, allowing surface to dry 10 minutes between coats. Dries to the touch in 30 minutes. Can be handles in 1 hour.

Additional Information:

• This product is designed for spray application only and cannot be wiped on with a rag or towel.
• Renews and protects the factory OEM finish on weathered or discoloured automotive trim and bumpers.
• Silicone-free formula that bonds to plastic or metal surfaces with a flexible finish and lasting UV protection.
• Suitable for interior and exterior purposes.
• The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
• After each use, invert can and spray until clear gas comes out.
• If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard empty can in trash pick-up.
• Covers approximately 12-14 square feet per can.

*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.