VHT Nite-Shades™ is a transparent black taillight lens coating for creating a custom European styling. When applied to taillights, fog lights or turn indicators, VHT Nite-Shades™ appears black until they are lit, then the natural red colour appears. Warning: Once applied to a plastic lens, VHT Nite-Shades™ cannot be satisfactorily removed. For off-road use only.
Directions:
PREP: Prepare the surface by removing any oil, grease, wax, or road tar. For best results wipe down with a grease and wax remover and a clean cloth to clean the surface. Mask off surrounding areas to protect from overspray. Use at temperatures between 60°F (16°C) and 95°F (35°C) and when humidity is less than 60%.
SHAKE: Shake can vigorously for one full minute after mixing ball moves freely. Shake can for 10 seconds after each minute of use.
APPLY: To spray, hold can parallel and 8-10 inches from surface to be painted and use in an even, sweeping motion. Apply one light coat or just enough to change lens colour. DO NOT exceed more than 3 coats or light may no show through. Dries to the touch in 1 hour. Can be handled in 3 hours. Cures completely in 24 hours. Once applied to plastic, the paint cannot be satisfactorily removed. Optional: Apply a clear lacquer for added gloss and protection.
Additional Information:
Removing substrate from the vehicle is recommended for ease of application.
Provides a customised transparent-tint enhancement to taillights, fog lights and turn indicators. For off-road use only.
Once applied to plastic, the paint cannot be satisfactorily removed.
Too many coats can result in light not showing through – please refer to directions.
The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
After each use, invert can and spray until clear gas comes out.
If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard empty can in trash pick-up.
Covers approximately 12-14 square feet per can.
*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.
Unfortunately we currently do not offer customer pick ups
How much does shipping cost?
Shipping is a flat fee of $9.95, there may occasionally be an extra freight charge if items purchased are heavy, bulky or being delivered to a regional or remote location, but we will notify you via email if this occurs
How long will Shipping Take?
Metro Areas
Usually between 1-7 business days since time of order
Rural Areas
Rural areas can take anywhere between 1-10 business days depending on where you are located