Dupli-Color Carbon Fiber Kit

Dupli-Color Carbon Fiber Kit

VHT Hood, Bumper & Trim Paint Black 312g

VHT Hood, Bumper & Trim Paint is specifically designed restore the factory OEM black finish on your moulding, hood, bumper, and trim work.

  • Covers approximately 12-14 square feet per can.
  • Restores & blends into vehicle’s hood, bumper, trimming & more.
  • Ideal for: metal, aluminium, fiberglass & plastic.

*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.

$14.99
24 Hour Dispatch
SKU
SP27
or 4 interest-free payments of $3.75
Learn more

VHT Hood, Bumper & Trim urethane coating is formulated with elastomers that allow for the flexing of paint on pliable surfaces. This unique formula is also well suited for fiberglass, plastic, and other resin-based bodywork. Equally suited for metal, VHT Hood, Bumper & Trim Paint offers excellent hide and mar resistance.

 

Directions:

  1. PREP: Prepare surface by removing loose paint, dirt, rust, grease, wax, etc. Use grease and wax remover to clean surface. Light sand surface with 320-grit sandpaper or Red Scotch Brite pad. Wipe surface down again with grease and wax remover. Mask-off surround areas to protect from overspray. Use at temperatures between 60°F (16°C) and 95°F (35°C) and when humidity is less than 60%.
  2. SHAKE: Shake can vigorously for one full minute after mixing ball moves freely and 10 seconds after each minute of use.
  3. APPLY: If bare metal is exposed. Apply VHT Prime Coat Primer or equivalent first. To spray, hold can parallel and 8-10 inches from the surface to be painted and use in an even, sweeping motion. Apply 2 light coats, followed by one medium wet coat. Apply all coats within 1 hour, allowing 10 minutes between each coat. For additional coats after 1 hour, wait 7 days for paint to cure. Dries to the touch in 20 minutes and can be handled in 3 hours.

 

Additional Information:

  • Ideal for restoring the factory OEM flat black finish on your vehicle’s mouldings, hood, bumper, and trim work.
  • Ideal for metal, aluminium, fiberglass, and plastic.
  • The EZ Touch Nozzle requires 50% less finger fatigue than a standard nozzle and allows for greater coverage and less overspray.
  • After each use, invert can and spray until clear gas comes out.
  • If spray button becomes clogged, wear eye protection and wipe off orifice with lacquer thinner. DO NOT stick pins or wire into the can opening. Discard empty can in trash pick-up.
  • Covers approximately 12-14 square feet per can.

*This item is considered DG & may incur additional freight charge – Please see our Shipping & Delivery tab for further information.

Pick Up

Unfortunately we currently do not offer customer pick ups

How much does shipping cost?

Shipping is a flat fee of $9.95, there may occasionally be an extra freight charge if items purchased are heavy, bulky or being delivered to a regional or remote location, but we will notify you via email if this occurs

How long will Shipping Take?

Metro Areas

Usually between 1-7 business days since time of order

Rural Areas

Rural areas can take anywhere between 1-10 business days depending on where you are located

Customer's Are Saying